海角黑料

Department of
Mechanical, Materials and Manufacturing Engineering
 

Image of Chin Seong Lim

Chin Seong Lim

Professor, Head of Department (UNM) Electrical and Electronic Engineering,

Contact

  • workRoom BB38 Block B
    Malaysia Campus
    Jalan Broga
    43500 Semenyih
    Selangor Darul Ehsan
    Malaysia
  • work+6 (03) 8924 8321
  • fax+6 (03) 8924 8017

Biography

Dr. Lim obtained his PhD degree in Mechanical Engineering from National University of Singapore (NU S), major in the area of micro/nano technology and development of semiconductor processes. He completed his Bachelor degree study in the field of Mechanical Engineering from Universiti Teknologi Malaysia Skudai, Johor Malaysia. Prior to joining 海角黑料 Malaysia (UNM), Dr. Lim has more than 8 years of working experience in R&D environment as well as high volume manufacturing industry. He was a Research Scientist in Data Storage Institute (DSI), an Agency of Science, Technology and Research (ASTAR) affliated research institute in Singapore, primarily working on numerous research projects such as the fabrication of nanostructures for optical nanoscopy and nanoimaging application. Dr. Lim also worked in hard disk drive industry (Seagate Industry) as manufacturing engineer, in semiconductor industry (Chartered Semiconductor) as senior engineer in technology development as well as in R&D (NUS) as research engineer. Throughout these years of work experiences, he had been exposed to various high end technologies in micro and nanoengineering. He has been involved in some of the process improvement projects in Seagate whereby through the execution of six sigma approach the yield had been significantly improved and 2 projects were awarded the best team awards.

Currently Dr. Lim is the Associate Professor in the 海角黑料 Malaysia Campus (UNMC) at the Department of Mechanical, Materials and Manufacturing Engineering. He is the module convenor for Design and Manufacture 1, and Group Design and Make modules. His research interests include laser-based micro/nano fabrication technology, laser materials processing, development of semiconductor processing technologies, advanced manufacturing techniques, advanced materials synthesis and photonics-related research. Dr. Lim is the Malaysia campus director of the Institute of Aerospace Technology, 海角黑料 and leading the Smart Manufacturing and Intelligent Systems research group in UNM.

Dr. Lim also served as the committee member in the Mechanical Engineering Technical Division (METD) in The Institution of Engineers Malaysia (IEM) for numerous years in which the division has won the prestige Annual IEM Presidential Award.

Expertise Summary

- Laser Materials Proceesing

  • Ablation
  • Surface Modification
  • Laser-matter interaction

- Advanced Manufacturing

- Conventional and Non-conventional Machining eg. CNC maching, Electro-discharged Machining

- Additive Manufacturing

- Intelligent Systems in manufacturing and transportation.

- Condition Monitoring and Optimization

- Lithography - Optical & E-beam

- Etching - reactive ion etching, isotropic chemical etching, ion milling

- Thin Film Depositions

- Optical Engineering and Photonics

- Optical and Atomic Force Microscopy

- Spectroscopy

- Terahertz technology

- Metamaterials and Plasmonics

- Finite Difference Time Domain (FDTD) modeling and simulation

- Six Sigma in Manufacturing Industry for process improvement & yield reduction

Teaching Summary

Dr. Lim's teaching interests are in the area of design and manufacturing whereby he lectures in Year 1 Engineering Drawing and Manufacturing Technologies. He also conduct design office sessions on… read more

Research Summary

Dr. Lim's main research interests are in the area of laser-based micro/nano fabrication technology and advanced manufacturing techniques. He had actively been working on the development surface… read more

Recent Publications

  • HAO HUANG, HONGCHENG WANG, GUIHUA CHEN, MANNA CHEN, CHIN SEONG LIM and KOK-CHEONG WONG, 2023. Chaos, Solitons & Fractals. 168, 113137
  • R. ZAKARIA, M. MAHBUB and C.S. LIM, 2023. Results in Optics. 11, 100374
  • TIYAMIKE BANDA, VERONICA LESTARI JAUW, ALI AKHAVAN FARID, NG HAO WEN, KEVIN CHOI WEI XUAN and CHIN SEONG LIM, 2023. The International Journal of Advanced Manufacturing Technology. 128, 3885-3899
  • TIYAMIKE BANDA, YU-CHEN LIU, ALI AKHAVAN FARID and CHIN SEONG LIM, 2023. The International Journal of Advanced Manufacturing Technology. 126, 935-945

Dr. Lim's teaching interests are in the area of design and manufacturing whereby he lectures in Year 1 Engineering Drawing and Manufacturing Technologies. He also conduct design office sessions on Design and Manufacture as well as workshops on Design Methodology for Year 4 Group Design Project students. Besides that Dr. Lim also supervises BEng and MEng final year research projects students which support part of his research activities in Advanced Manufacturing Technology and Laser Micro/Nano Fabrication Techniques.

MM1DM1 Design and Manufacture 1 -

MM4GDM Group Design and Make -

MM4ATR Advanced Technology Review

BEng Individual Project & Group Design Project

MEng Individual Project & Group Design and Make Project

MSc Project/Dissertation

Current Research

Dr. Lim's main research interests are in the area of laser-based micro/nano fabrication technology and advanced manufacturing techniques. He had actively been working on the development surface micro/nano structuring technique for micro/nano-device fabrication and characterization. He is actively involving in the development of semiconductor processing techniques particularly in photolithography and thin film coating technologies for the synthesis of advanced functional materials. He also working on the research of advanced manufacturing technologies such as CNC machining, 3D printing and non-conventional machining processes. Dr. Lim has vast experiences on operation of various laser systems, semiconductor manufacturing processes and characterization methods. He has published papers in numbers of prestige journals such as Nature, Optics Express, Applied Physics Letters and International Journal of Machine Tool and Manufacture, etc.

  • Laser materials processing
  • Advanced manufacturing and non-conventional manufacturing
  • Additive Manufacturing
  • Condition monitoring and optimization
  • Intelligent Systems in manufacturing and transportation.
  • Micro and nano fabrications
  • Semiconductor manufacturing processes
  • Micro optics fabrication and characterization
  • Surface nanopatterning and nanostructuring
  • Advanced Materials Synthesis
  • Optics and Photonics
  • Terahertz and Metamaterials
  • Plasmonic and surface plasmon
  • HAO HUANG, HONGCHENG WANG, GUIHUA CHEN, MANNA CHEN, CHIN SEONG LIM and KOK-CHEONG WONG, 2023. Chaos, Solitons & Fractals. 168, 113137
  • R. ZAKARIA, M. MAHBUB and C.S. LIM, 2023. Results in Optics. 11, 100374
  • TIYAMIKE BANDA, VERONICA LESTARI JAUW, ALI AKHAVAN FARID, NG HAO WEN, KEVIN CHOI WEI XUAN and CHIN SEONG LIM, 2023. The International Journal of Advanced Manufacturing Technology. 128, 3885-3899
  • TIYAMIKE BANDA, YU-CHEN LIU, ALI AKHAVAN FARID and CHIN SEONG LIM, 2023. The International Journal of Advanced Manufacturing Technology. 126, 935-945
  • TIYAMIKE BANDA, KING YUNG HO, ALI AKHAVAN FARID and CHIN SEONG LIM, 2022. Journal of Materials Engineering and Performance. 31(3), 2309鈥�2320
  • LAW, WEE KING, WU, ZI YANG, WONG, KOK CHEONG, WANG, HAO LIANG, SUN, ZHEN ZHONG and LIM, CHIN SEONG, 2022. Key Engineering Materials. 913, 259-264
  • HAO HUANG, HONGCHENG WANG, MANNA CHEN, CHIN SEONG LIM and KOK-CHEONG WONG, 2022. Chaos, Solitons & Fractals. 158, 112079
  • TIYAMIKE BANDA, VERONICA LESTARI聽JAUW, CHUAN LI, ALI聽AKHAVAN聽FARID and CHIN SEONG LIM, 2022. The International Journal of Advanced Manufacturing Technology. 120, 4387鈥�4401
  • BANDA, TIYAMIKE, FARID, ALI AKHAVAN, LI, CHUAN, JAUW, VERONICA LESTARI and LIM, CHIN SEONG, 2022. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY. 121(11-12), 7057-7086
  • BEH, SIN Y., JAUW, VERONICA L., LIM, CHIN SEONG and LIEW, CHEE LEONG, 2022. In: 2022 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET). 153-157
  • JULIANA, HO QIU ANN, SAKUNDARINI, NOVITA and LIM, CHIN SEONG, 2022. In: 2022 IEEE International Conference on Artificial Intelligence in Engineering and Technology (IICAIET). 113-118
  • A. H. ABDULLAH RIPAIN, YUAN FENG LIM, CHIN SEONG LIM and ROZALINA ZAKARIA, 2022. Journal of Optics.
  • K.B. NG, W.Y. CHONG, C.S. LIM and H. AHMAD, 2022. Optik. 270, 170068
  • TIYAMIKE BANDA, BRYAN YEOH WEI JIE, ALI AKHAVAN FARID and CHIN SEONG LIM, 2021. Lecture Notes in Electrical Engineering: Recent Trends in Mechatronics Towards Industry 4.0. 730, 737-747
  • TIYAMIKE BANDA, KOK-CHEONG WONG, ALI AKHAVAN FARID and CHIN SEONG LIM, 2021. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. 579-588
  • KOK-CHEONG WONG, ZHI JIE TEE, BOON HOE GOH, CHIN SEONG LIM, ENG HWA YAP and ANDREW HUEY PING TAN, 2021. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. 59-68
  • LAW, WEE KING, WONG, KOK-CHEONG, WANG, HAOLIANG, SUN, ZHENZHONG and LIM, CHIN SEONG, 2021. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE. 30, 6389鈥�6405
  • NURUL SYAZWANI ROHIZAT, ATIENA HUSNA ABDULLAH RIPAIN, CHIN SEONG LIM, CHEE LEONG TAN and ROZALINA ZAKARIA, 2021. Scientific Report. 11, 19688
  • RAYMOND YEOW CHU CHAI, RICKY CHEE LEONG LIEW and CHIN SEONG LIM, 2021. Materials Today: Proceedings. 48(6), 1885-1891
  • KOK BIN NG, JINGWEN CHEW, WU YI CHONG, CHIN SEONG LIM and HARITH BIN AHMAD, 2020. Optical Engineering. 59(5), 057102
  • WEN SIN CHONG, SOON XIN GAN, HASSAN MOHAMMED AL-TUWIRIT, WU YI CHONG, CHIN SEONG LIM and HARITH AHMAD, 2020. Materials Chemistry and Physics. 249, 122970
  • HO JINN SHYUAN, PUNG YUH FEN, AZZAHRAAIZZATI BT AZIZA, CHEW HUI YEE, YING YUETLEE, NGUYEN DUONG NGOC DIEM and LIM CHIN SEONG, 2020. Potent antifungal activity of ZnO Nanoparticles on R. mucilaginosa is mediated by reactive oxygen species and zinc ion IOSR Journal of Engineering. 10(4), 44-57
  • MOHANKUMAR PALANISWAMY, ANIS SUHAILA SHUIB, KHAI CHING NG, SHAJAN KOSHY, KARUTHAN CHINNA and CHIN SEONG LIM, 2019. AIP Conference Proceedings: Proceedings of the International Engineering Research Conference. 2137, 040004
  • SHANMUGA VADIVU, N.AND ZAKARIA, R.AND MEZHER, M. H.AND MAHESWAR, R.AND LIM, C. S.AND LAI, D.AND AMIRI, I. S., 2019. Optical and Quantum Electronics. 51(11), 366
  • S.F.A.Z. YUSOFF, C.S. LIM, S.R. AZZUHRI, H. AHMAD and R. ZAKARIA, 2018. Results in Physics. 10, 308-316
  • IRAJ S. AMIRI, M.M. ARIANNEJAD, D. VIGNESWARAN, C.S. LIM and P. YUPAPIN, 2018. Results in Physics. 11, 306-314
  • ROZALINA ZAKARIA, SITI FATIMAH AZ ZAHRA YUSOFF,, KOK CHUNG LAW,, CHIN SEONG LIM, and HARITH AHMAD, 2017. Nanoscale Research Letters. 12(1), 1-9
  • A. LOW, S.H. SAW, V. DAMIDEH and C. S. LIM, 2016. Key Engineering Materials: Science and Engineering of Materials II. 701, 42-46
  • A. XAVIER and C.S. LIM, 2015. Simulation and Analysis of Temperature Distribution and Material Properties Change of a Thermal Heat Sink Undergoing Thermal Loading in a Mobile Computer IOP Conference Series: Materials Science and Engineering. 88(1), 012043
  • LIM, CS, HONG, MH, KUMAR, A SENTHIL, RAHMAN, M and CHONG, TC, 2012. Applied Physics A. 107(1), 149-153
  • HAN, NR, CHEN, ZC, LIM, CS, NG, B and HONG, MH, 2011. Optics express. 19(8), 6990-6998
  • WANG F, HAN Y, LIM CS, LU Y, WANG J, XU J, CHEN H, ZHANG C, HONG M and LIU X, 2010. Nature. 463(7284), 1061-5
  • CHEN, ZC, HONG, MH, DONG, H, GONG, YD, LIM, CS, SHI, LP and CHONG, TC, 2010. Applied Physics A. 101(1), 33-36
  • LIM, CS, HONG, MH, LIN, Y, TAN, LS, KUMAR, A SENTHIL and RAHMAN, M, 2010. Surface Review and Letters. 17(03), 383-387
  • CHEN, ZC, HONG, MH, LIM, CS, HAN, NR, SHI, LP and CHONG, TC, 2010. Applied Physics Letters. 96(18), 181101
  • LIM, CS, HONG, MH, CHEN, ZC, HAN, NR, LUK锟結ANCHUK, B and CHONG, TC, 2010. Optics express. 18(12), 12421-12429
  • LIN, Y, HONG, MH, CHEN, GX, LIM, CS, WANG, ZB, TAN, LS, SHI, LP and CHONG, TC, 2008. Journal of Alloys and Compounds. 449(1), 253-257
  • LIN, Y, HONG, MH, TAN, LS, LIM, CS, SHI, LP and CHONG, TC, 2008. J. Laser. Micro. Nanoen. 3, 52-57
  • HONG, MINGHUI, LIM, CHIN SEONG, ZHOU, YI, TAN, LENG SEOW, SHI, LUPING and CHONG, TOW CHONG, 2008. The Review of Laser Engineering. 36(APLS), 1184-1187
  • ZHOU, Y, HONG, MH, FUH, JYH, LU, L, LUK锟結ANCHUK, BS, LIM, CS and WANG, ZB, 2007. Journal of materials processing technology. 192, 212-217
  • LIN, Y, HONG, MH, CHEN, GX, LIM, CS, TAN, LS, WANG, ZB, SHI, LP and CHONG, TC, 2007. Journal of materials processing technology. 192, 340-345
  • LIM, CS, HONG, MH, LIN, Y, CHEN, GX, KUMAR, A SENTHIL, RAHMAN, M, TAN, LS, FUH, JYH and LIM, GC, 2007. Journal of materials processing technology. 192, 328-333
  • LIM, CS, HONG, MH, KUMAR, A SENTHIL, RAHMAN, M and LIU, XD, 2006. International journal of machine tools and manufacture. 46(5), 552-558
  • LIM, CS, HONG, MH, LIN, Y, XIE, Q, LUK锟結ANCHUK, BS, SENTHIL KUMAR, A and RAHMAN, M, 2006. Applied physics letters. 89(19), 191125
  • LIN, Y, HONG, MH, CHONG, TC, LIM, CS, CHEN, GX, TAN, LS, WANG, ZB and SHI, LP, 2006. Applied physics letters. 89(4), 041108
  • LAW, WEE KING, WU, ZIYANG, SONG, CHENGHAO, WANG, HAOLIANG, WONG, KOK-CHEONG, LIM, CHIN SEONG and SUN, ZHENZHONG, steel research international. n/a(n/a), 2200203

Department of Mechanical, Manufacturing and Materials Engineering

The 海角黑料
University Park
Nottingham, NG7 2RD


telephone: +44 (0) 115 95 14081